openmolecules.org

 
Home » DataWarrior » Installation Issues » Windows 10 Startup Issues
Windows 10 Startup Issues [message #1591] Mon, 11 April 2022 22:23 Go to next message
KymeraIT is currently offline  KymeraIT
Messages: 2
Registered: April 2022
Junior Member
All,

After installing DataWarrior 5.5, the application simply does not run on a Windows 10 system. Some investigation does show that it is erroring out, but the only indication with no detail is in the Windows event logs (the generic BEX64 error).

We have attempted to run with elevated permissions with the same result. We have also reinstalled the application with no luck. We can also confirm that antivirus software is not reporting any issues relating to DataWarrior.

Any further suggestions/advice would be appreciated.
Re: Windows 10 Startup Issues [message #1594 is a reply to message #1591] Thu, 14 April 2022 11:00 Go to previous messageGo to next message
thomas is currently offline  thomas
Messages: 537
Registered: June 2014
Senior Member
Do you see any messages, when starting DataWarrior.exe from the command line?
Did you check the MD5 sum of the msi?
Did you make sure that none of the exe, dll, or jar files in the DataWarrior directory are blocked in the file properties dialog?
You may download a debug version 'DataWarrior_d.exe' from openmolecules.org/datawarrior/dw550_d.zip. Then unpack and copy these files into the DataWarrior installation directory. Make sure, none of the new files is blocked. Then start DataWarrior_d.exe from the command line. Any messages?

Thomas

[Updated on: Mon, 06 June 2022 09:45]

Report message to a moderator

Re: Windows 10 Startup Issues [message #1597 is a reply to message #1594] Fri, 22 April 2022 21:01 Go to previous messageGo to next message
KymeraIT is currently offline  KymeraIT
Messages: 2
Registered: April 2022
Junior Member
Unfortunately it looks like despite the attempt to execute in both elevated and non-elevated CMD the application still does not open. The debug download link appears to either be dead or has been moved. Is there another location where that version of the application can be pulled from? i.e. the GitHub page or another page on the site etc?
Re: Windows 10 Startup Issues [message #1599 is a reply to message #1597] Fri, 22 April 2022 23:02 Go to previous messageGo to next message
nbehrnd is currently offline  nbehrnd
Messages: 141
Registered: June 2019
Senior Member
The GitHub page[1] you refer to is going to be valuable if you know how to convert the source code into an executable. Else, use the installer suitable for your operational system from the download page.[2] And note that there are three, each for only one of Linux .or. Mac .or Windows.

Speaking of such (Linux) and the weekend ahead, an alternative approach could be the installation of a Linux distribution (e.g., xubuntu), side-by-side to your Windows operating system, or on top of WSL[3] which then would be the platform to run DataWarrior instead. (In this case, using these environments, you would elect DataWarrior's installer /for Linux/.)

Norwid

[1] https://github.com/thsa/datawarrior
[2] https://openmolecules.org/datawarrior/download.html
[3] https://en.wikipedia.org/wiki/Windows_Subsystem_for_Linux
Re: Windows 10 Startup Issues [message #1600 is a reply to message #1599] Sun, 24 April 2022 12:54 Go to previous messageGo to next message
thomas is currently offline  thomas
Messages: 537
Registered: June 2014
Senior Member
sorry, the correct debug link is https://openmolecules.org/datawarrior/dw550win_d.zip

[Updated on: Mon, 06 June 2022 09:44]

Report message to a moderator

Re: Windows 10 Startup Issues [message #1623 is a reply to message #1600] Mon, 06 June 2022 07:19 Go to previous messageGo to next message
Stevennall is currently offline  Stevennall
Messages: 1
Registered: June 2022
Junior Member
Unfortunately, it appears that the application does not open despite attempts to execute in both elevated and non-elevated CMD. The debug download link appears to be broken or relocated.
Re: Windows 10 Startup Issues [message #1625 is a reply to message #1623] Mon, 06 June 2022 09:47 Go to previous messageGo to next message
thomas is currently offline  thomas
Messages: 537
Registered: June 2014
Senior Member
sorry again, for some reason the link was still incorrect. I have corrected the link in the messages above. It should work now.
Re: Windows 10 Startup Issues [message #1633 is a reply to message #1625] Mon, 13 June 2022 14:47 Go to previous messageGo to next message
chemtv is currently offline  chemtv
Messages: 20
Registered: February 2015
Location: Indianapolis
Junior Member
I am having the same issue that datawarrior v5.50 will not run on Win 10. Absolutely nothing (visible) happens. Permissions are fine and there is no virus check going on, also I do not have SentinelOne installed as mentioned previously. Is there a repository of older versions for windows?
Thanks,
Greg
Re: Windows 10 Startup Issues [message #1634 is a reply to message #1633] Mon, 13 June 2022 16:18 Go to previous messageGo to next message
chemtv is currently offline  chemtv
Messages: 20
Registered: February 2015
Location: Indianapolis
Junior Member
Hmm, Please ignore my message above...
I just saw a thread in "if my PC do not install office, how can we install datawarrior and initiate it?" referencing the need to install 'vcruntime140.dll' Once I did that datawarrior runs fine.

Thanks for a fine program, it's a great tool! I use it predominately on Macs and Linux, but occasionally need to run it on Windows... maybe need to push the 'dll' message to the top.

regards,
Greg
Re: Windows 10 Startup Issues [message #1698 is a reply to message #1591] Sat, 20 August 2022 23:17 Go to previous messageGo to next message
John is currently offline  John
Messages: 1
Registered: August 2022
Junior Member
DataWarrior installed and is working on my ThinkPad E580 running Windows 10. Then, I tried installing on my desktop computer (AMD Ryzen 9 processor) also running Windows 10, but DataWarrior does not start on the desktop computer. Perhaps there are hardware compatibility issues.
Re: Windows 10 Startup Issues [message #1699 is a reply to message #1698] Sun, 21 August 2022 14:36 Go to previous messageGo to next message
thomas is currently offline  thomas
Messages: 537
Registered: June 2014
Senior Member
I consider a hardware issue as highly unlikely, because DataWarrior is based on jre8, which is extremely widespread and highly compatible. I suggest to first try run DataWarrior from the command line and see, whether you get error messages. If there is no message, then often some security software prevents to launch DataWarrior.exe. If you have a message that some runtime dll is missing, you might need to download 'vcruntime140.dll' and copy it into the DataWarrior installation directory (see post by chemtv). You may also ensure that none of the exe or dll files are blocked in the properties dialog.
Re: Windows 10 Startup Issues [message #1719 is a reply to message #1591] Tue, 30 August 2022 23:33 Go to previous messageGo to next message
fcompuesto is currently offline  fcompuesto
Messages: 1
Registered: August 2022
Junior Member
Hi,

I followed the guided and installed DW on a Window 10 system but it's not launching.

Below is the event log from the system.

Faulting application name: DataWarrior.exe, version: 0.0.0.0, time stamp: 0x5dbc455a
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x0000000000046b20
Faulting process id: 0x311c
Faulting application start time: 0x01d8bcb6832c56a1
Faulting application path: C:\Program Files\DataWarrior\DataWarrior.exe
Faulting module path: unknown
Report Id: d451635f-73b5-44a4-a678-efebe09cab8d
Faulting package full name:
Faulting package-relative application ID:

MD5 checked
Tried to run as admin
Set full NTFS permissions
Tried re-installing

Can you please help?

Thanks in advance
Re: Windows 10 Startup Issues [message #1720 is a reply to message #1719] Wed, 31 August 2022 10:12 Go to previous message
thomas is currently offline  thomas
Messages: 537
Registered: June 2014
Senior Member
did you try running from the command line? Are there error messages? If there is no message at all, then I suspect a securit< software to prevent DataWarrior from starting. If you see a message, we know more...
Maybe your system is missing the vcruntime140.dll. You could download that from various web sites and put it into the DataWarrior installation folder. If more people have that issue, I would provide that dll as part of the installer in the future...
Previous Topic: Interest in a Mavenised form of the code?
Goto Forum:
  


Current Time: Sun Sep 25 13:34:25 CEST 2022

Total time taken to generate the page: 0.01717 seconds